Upgrade to the flanged version of Armstrong's compact, Double-Isolation-and-Bleed Trap Valve Station, and you can replace any existing flanged steam trap, valve, or strainer quickly without any pipework modifications. Replacing a complete welded or threaded set of ancillaries requires only four welds or threads with the SW / BW or NPT / BSPT versions.
A safer way to prevent burns during steam trap replacement—with no need to shut down the system.
Single Isolation valves and standard double-block-and-bleed configurations allow operators to close just one of the two isolation valves, resulting in a severe accident. This mistake is impossible with Armstrong's unique, Double-Isolation-and-Bleed Trap Valve Station because both isolation valves operate simultaneously.
Save design, procurement, and installation costs with Armstrong's compact, 10-in-1 TVS 6000UD.
Armstrong's Double-Isolation-and-Bleed Trap Valve Station contains eight high-quality valves with one strainer and one two-bolt universal connector—all in a single unit. There is no need to design, purchase, store, and install ten separate components with Armstrong's Trap Valve Station, making it the most cost-effective solution on the market to eliminate risks associated with replacing steam traps.
Features of TVS 6000UD include:
- Error-proof double-isolation and bleed design
- Allows for optimal energy efficiency through steam trap replacement with no system shut-down
- PN40 has a standard steam trap face-to-face (DN15 and DN20 are 150 mm and DN25 is 160 mm)
- Custom footprints for existing installations available upon request
- Available for all steam trap technologies with universal two-bolt connector
- Streamlined mounting and fewer weld points
- 3-year warranty and repairable piston valve technology
In Missouri, Kansas, Southern Illinois, and Western Kentucky contact Mead O'Brien. Call them at (800) 892-2769 or visit their website at https://meadobrien.com.
