Why Measuring Differential Pressure Across a Filter or Strainer is Important


differential pressure gauge
Differential pressure gauge.
(Ashcroft)
In many applications fluids passing through a pipe require filtering this results in the need for continuous differential pressure monitoring. Differential pressure gauges, switches and transmitters help monitor your processes.

Filters and strainers commonly are positioned to capture solids and particulates. The filter will obstruct the flow through the pipe lowering the pressure on the downstream side. These effects may vary depending on the filters construction. Filter media is the material that removes impurities. The smaller the pores, the larger the friction. Higher friction means greater pressure drop. Contaminants or particulates that build up in the filter will reduce media flow. As the filter becomes clogged, the downstream pressure drops. This results in an increased differential pressure, also referred to as the Delta-P. Saturated filters may also begin to shed
differential pressure switch
Differential pressure switch.
(Ashcroft)
captured particles. With the filter no longer functioning properly, the contaminants can escape into the process. This is why proper monitoring of pressure drop is crucial.

differential pressure transmitter
Differential pressure transmitter.
(Ashcroft)
Differential pressure is measured by placing taps both before and after the filter. A differential pressure measuring instrument can be connected to detect the high side and low-side pressures. The instrument will report the difference between the two sides. The saturation point will be indicated when the Delta P value reaches a predetermined threshold. This value was derived from a calculation that factors in the flow rate fluid viscosity and filter characteristics. The filter manufacturer can be contacted for help in identifying the optimum differential pressure value that tells you when it'stime to service the filter.

When specifying a differential pressure instrument there are two important factors to consider. The first is the DP range, which is based upon the most difference in pressure that the restriction is likely to produce. The second is the instruments ability to contain the static pressure, which is simply the pressure in the line while the differential pressure remains the same. A higher line pressure may require an instrument rated for higher static pressure.

Mead O'Brien
https://meadobrien.com
(800) 892-2769

NACE Standards - Measuring the Pressure of Sour Gas and Crude

NACEIn 1943 a group of corrosion engineers working in the pipeline industry formed the National Association of Corrosion Engineers with the goal of "protecting people, assets, and the environment from corrosion”. In the 1960s, they commenced development of control standards to define appropriate materials for a wide variety of corrosive applications, including oil and gas production and refinery facilities. In 1993, the organization was renamed “NACE International”.

Today, NACE offers over 150 standards that address metal corrosion in a vast number of applications ranging from exposed metal structures to corrosion resistant coatings on railroad cars.

The following NACE Measuring Pressure of Sour Gas and Crude White Paper (courtesy of Ashcroft) discusses NACE standards that specifically address corrosion resulting from expo- sure to sour gas or sour crude.

You can download the entire NACE Standards Sour Gas and Crude White Paper here, or review it in the embedded document below.

For more information, contact Mead O'Brien at (800) 892-2769 or visit their web site at https://meadobrien.com.